Honda Metropolitan CHF50 User Manual

FUEL SYSTEM
Disconnect the vacuum hose, air supply hose and
the PAIR control valve.
Installation is in the reverse order of removal.
Install the wires and hoses properly (page 1-14).
PAIR CONTROL VALVE
AIR CLEANER HOUSING:
(After '05 model)
REMOVAL/INSTALLATION
Refer to page 3-5 Remove the luggage box (page 2-6).
for air cleaner
element
replacement.
Remove the rear fender bolt and air cleaner housing
mounting bolts.
Loosen the connecting hose band screw and dis-
connect the connecting hose from the carburetor.
Disconnect the crankcase breather hose, vacuum
hose and air suction hose from the air cleaner hous-
ing.
CRANKCASE BREATHER HOSE
VACUUM HOSE ^ AIR SUCTION HOSE
5-7

Honda Metropolitan CHF50 Specifications

General

Engine Type	49cc liquid-cooled single-cylinder four-stroke
Ignition	CDI
Transmission	Automatic V-Matic belt drive
Rear Suspension	Single shock
Front Brake	Drum
Rear Brake	Drum
Front Tire	80/100-10
Rear Tire	80/100-10
Seat Height	28.3 inches
Fuel Capacity	1.3 gallons
Bore x Stroke	37.8mm x 44.0mm
Compression Ratio	12.0:1
Starter	Electric
Curb Weight	179 pounds