 









301ENGINE
-
WORK
ON
THE
INDIVIDUAL
PARTS
136
RemDYinlllle
crankshaft
seal
rinl
in
the
clutch
caver
-
Pry
out shaft
seal
rings and
Installinllhe
crankshaft
seal
rinl
in
the
clutch
caver
-
Press
in
shaft
seal
ring with the
open
side facing downward.
•
Info
I Shaft
seal
ring
has
3 distance pieces.
-
Press
in
shaft
seal
ring with the
open
side facing upward.
•
Info
I Make sure the distance between the two shaft
seal
rings is maintained.
- Lubricate the sealing lips.
I Long-life
grease
(or
p.
226)
-
Blowout
the oil channel with compressed air and check that it is clear.
RemDYinlllle
stator
Condition
The alternator cover
has
been
removed.
-
Remove
screw
and
the retaining bracket.
-
Remove
cable support sleeve from the alternator
case.
-
Remove
screws
-
Take
the stator out
of
the alternator cover.
301237-10
Installinllhe
stator
- Position the stator
in
the alternator cover.
-
Mou
nt screws
Guideline
Screw, stator bracket
M5
6
Nm
Loctit'"
243
111
(4.4 Ibf ttl
- Position cable support sleeve
in
the alternator
case.
- Position the retaining bracket. Mount
and
tighten screw
301237-11
To Next Page
Loading...
Need help?
General
