301ENGINE
-
WORK
ON
THE
INDIVIDUAL
PARTS
148
RemDYinlllle
freewheel
Chackinllha
freewhaal
301236-10
-
Press
expansion ring together using suitable pliers.
-
Take
freewheel out of the freewheel hub.
- Insert freewheel gear into the freewheel hub, turning the freewheel gear clock-
wise;
do
not
wedge.
- Check the locking action of starter gear
•
If
the freewheel gear does not turn clockwise
or
if it
does
not lock counterclock-
wise:
-
Remove
the freewheel. (
..
p.
149)
- Turn the freewheel
180·.
- Install the free wheel. (
..
p.
149)
- Thoroughly oil all parts.
- Pull the ends
of
expansion ring together.
- Slide freewheel into the freewheel hub.
•
Info
I Note the direction of rotation.
- Ensure that all of the tabs of the expansion ring
pass
through the slots of the
freewheel.
•
Info
I
If
necessary,
apply pressure using a screwdriver.
To Next Page
Loading...
Need help?
General
