





O8IMASK,
FENDER
82
- Remove screws .
Remove
the front fender.
- Make sure the spacers remain in place.
- Ensure
that
the spacers are mounted in the fender.
- Position the front fender. Mount and tighten screws
Guideline
I Remaining screws, chassis
110
Nm
(7.4
Ibf
It)
I
•
Info
I Make sure the holding lugs engage in the start number plate.
Removina
tile
start
number
plate
- Remove screw and take off the clamp.
- Remove screw . Take
off
the start number plate.
- Position the start number plate. Mount and tighten screw
Guideline
I Remaining screws, chassis
110
Nm
(7.4
Ibf
It)
I
•
Info
I Ensure
that
the retaining lugs engage in the fender.
- Position the brake line. Put the clamp on, and mount and tighten screw
To Next Page
Loading...
Need help?
General
