O9IFRONT
WHEEL
RemDYin&
front
wheel
Warning
Preliminary
work
- Raise the motorcycle with the
lift
stand. (r
p.
9)
Main
work
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake pistons.
•
Info
I Make sure when pushing back the brake pistons
that
you
do not press the
brake caliper against the spokes.
- Remove screw
- Loosen screw
- Holding the front wheel, withdraw the wheel spindle. Take the front wheel out
of
the fork.
•
Info
I
Do
not operate the hand brake lever when the front wheel is removed.
Always lay the wheel down in such a way
that
the brake disc is not dam-
aged.
- Remove spacers
Danger
of
accidents
Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
- Check the wheel bearing for damage and wear.
>
If
the wheel bearing is damaged or worn:
- Change the wheel bearing.
- Clean and grease shaft seal rings and bearing surface of the spacers.
I Long-life grease (r
p.
226)
- I nserl the spacers.
83
To Next Page
General
