KTM 450 SX-F EU Repair Manual






 
301ENGINE ASSEMBLY
Adjustinllhe valve clearance
- Remove the camshaft. ( or p. 120)
- Raise cam levers
-
Remove shims and set down in the position in which they were installed.
- Correct the shims according to the findings from checking the valve play.
- Insert the
fitting shims.
- Position the camshaft bearing bridges.
• Info
I Ensure that the needle rollers and the O-ring are correctly seated.
- Mount screws and tighten from the inside to the outside.
Guideline
Screw, camshaft bearing
bridge
M7xl
- Check the valve clearance. (or p. 172)
- Position starter id ler gear
- Mount torque limiter .
14 Nm
(10.3 Ibf It)
- Mount centering pins . Position alternator cover gasket
Lubricated with
engine oil
173

KTM 450 SX-F EU Specifications

General

Brand	KTM
Model	450 SX-F EU
Category	Motorcycle
Language	English