ECG Dialog ECG – Arrhythmia
9 - 8 V Series Operating Instructions
Relearning Arrhythmia and ST
To relearn ST:
1. Select one of the ECG waveform tiles.
2. Select the Relearn Both button.
The Arrhythmia Learning message displays in the ECG waveform tile.
NOTE: To relearn ST only, refer to "Configuring the ST Parameter" on page 16-3
for additional information.
9.2.7 Viewing All ECG Waveforms
Using a V 12 with a 5 lead wire set:
• Select the View All ECG button from any of the ECG dialog tabs.
The ECG dialog automatically closes and the seven (7) or eight (8) ECG waveforms populate the
waveform tiles.
Using a V 12 with a 12 lead wire set:
1. Select the Arrhy digital or ECG waveform tile.
2. Select the View All ECG button.
The ECG dialog automatically closes and the first six (6) ECG waveforms populate the ECG
waveform tiles.
3. Select the View All ECG button again to view the next six (6)leads.
Using a V 21 with a 5 or 12 lead wire set:
1. Select the Arrhy digital or ECG waveform tile.
2. Select the View All ECG button.
The ECG dialog automatically closes and the six (6), or twelve (12) ECG waveforms populate the
waveform tiles.
NOTE: The View All ECG button is also available in the Display Options dialog
Refer to "View All ECG Mode" on page 3-17 for additional information.
NOTE: The View All ECG button may also be Quick Function button. Refer to
"Configuring the Quick Functions Tab" on page 26-4 for additional
information.
To Next Page
Loading...
Need help?
General
