Mindray V12 User Manual

V Series Operating Instructions 17 - 7
CO2 Monitoring (Optional) CO2 Tile Layouts
17.3 CO
2
Tile Layouts
The CO
2
parameter is shown in a digital tile and a waveform tile format
17.3.1 CO
2
Digital Tile Layout
The CO
2
digital tile displays:
1. Inspired CO
2
value
2. Message area
3. ET CO
2
value
4. CO
2
unit of measure
5. Resp unit of measure
6. Resp value
7. Source
8. High and low alarm limits
FIGURE 17-5 Example CO
2
Digital Tile
17.3.2 About the CO
2
Digital Tile
• If a CO
2
measurement is invalid, “- -” displays in place of digits.
• The CO
2
tile displays all values in units of mmHg with a resolution of 1 mmHg when displayed in
mmHg.
• The CO
2
tile displays all values in units of percent (%) with a resolution of 0.1% when displayed in
percent.
• The CO
2
tile displays all values in units of kPa with a resolution of 0.1 kPa when displayed in kPa.
17.3.3 CO
2
Alarms
Refer to the "Gases Tab" on page 8-7 for additional information.
17.3.4 Message Area
The message area provides information about the current state of the CO
2
parameter. If there is more
than one message to display, the messages scroll.
5
7
4
6
8 8
8
1
23
MESSAGE* DETAILS
Inspired CO2 High Alarm Violation Indicates that the current value is either equal to or higher than the set
alarm limits.
ET CO2 High Alarm Violation Indicates that the current value is either equal to or higher than the set
alarm limits.

Mindray V12 Specifications

General

Brand	Mindray
Model	V12
Category	Medical Equipment
Language	English