11.1 Display Settings
11.1.1 Display setting functions
11 - 2
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
11.1 Display Settings
11.1.1 Display setting functions
Setting regarding display is possible.
The items which can be set are shown below. When each item part is touched, the respective setting
becomes possible.
Items Description Setting range
Opening screen time
The title display period at the main unit boot can
be set.
0 to 60 seconds
*1
<At factory shipment: 5
seconds >
Screen save time
The period from the user stops the touch panel
operation till the screen save function starts can
be set.
0 to 60 minutes
<At factory shipment: 0
minutes>
Screen save backlight
Whether turn ON or OFF the backlight
simultaneously at the screen save function start
can be specified.
ON/OFF
<At factory shipment: OFF>
Language
*3
Confirmation of the current language and
switching language can be performed regarding
with the language displayed by utility and
dialogue.
(Japanese)
(English)
(Chinese
(Simplified))
(Chinese
(Traditional))
(Korean)
(German)
<At factory shipment: User's
selection>
Battery alarm display
Whether to display system alarm when the
voltage of the GOT internal battery has dropped
can be specified.
<At factory shipment: OFF>
Brightness, Contrast
The brightness can be adjusted.
11.2 Brightness, Contrast Adjustment
Invert Colors
Whether to invert white and black on the user-
created screen and utility screen can be
specified.
ON/OFF
<At factory shipment: OFF>
Human sensor
Screen saver status cancel by human sensor can
be set to Effective or Invalid.
Effective/Invalid
<At factory shipment: Effective>
Sensor detect level
*2
The sensor detect level can be set.
0 to 10
<At factory shipment:10>
To Next Page
Loading...
Need help?
General
