Multiplex PROFI TX 9 User Manual

Operating the transmitter using the PC
PROFI TX
Page 179
7.5.2 Using the MULTIFlight stick
Insert the MULTIFlight stick in a free USB socket on your PC. Wait until the driver
installation process, which starts automatically, is completed.
Now, you have to bind stick and transmitter. Press and hold the MULTIFlight stick
button until the yellow LED starts to flash. Switch on the transmitter. Open the
Setup > M-LINK menu. Activate the binding as described on page 93.
The binding procedure has completed successfully when the LED on the
MULTIFlight stick flashes slowly in regular intervals.
If you are using our MULTIFlight simulator, no further steps are required.
Calibration and assignment of the control channels match automatically.
The binding procedure can also be activated from the MULTIFlight simulator.
For other simulators, you may have to perform a calibration and assign the control
functions.

Multiplex PROFI TX 9 Specifications

General

Brand	Multiplex
Model	PROFI TX 9
Category	Remote Control
Language	English