Multiplex PROFI TX 9 User Manual

Menus
Page 104
PROFI TX
5.3.6.2 MagicSwitch
You can use the MagicSwitch sub-menu to change the configuration and settings
for the two MagicSwitches MS1 and MS2 (see section "MagicSwitch" on page 173).
The following settings are available for both MagicSwitches:
Switch
Switch assignment and combinations.
ON delay, OFF delay
Delay time for switching the MagicSwitch output; OFF and ON delay can be
configured separately.
To assign a MagicSwitch proceed as follows:
1. Open the desired input field.
2. Assign the desired switch using the central wheel.
3. Set the switch to the ON position or select it using the REV/CLR button.
4. Close the input field.
5.3.6.3 Switch
The following parameters in the menu indicate the switchable functions provided in
the software. Refer to section 6.4.2 "Assigning switches" on page 171 for the list of
functions.
To assign a control function proceed as follows:
1. Open the desired input field.
2. Assign the desired switch by operating it.
3. Set the switch to the ON position or select it using the REV/CLR button.
4. Close the input field.

Multiplex PROFI TX 9 Specifications

General

Brand	Multiplex
Model	PROFI TX 9
Category	Remote Control
Language	English