Nordson 3100V Series Customer Product Manual

Operation
A 4-3
Manually
Starting the Unit
lf
you
have not
programmed
your
unit to staft
automatically;
use
this
procedure
to manually
start
your
unit. lf
you
have
programmed your
unit
to start
automatically,
you
will
still need to start
the unit manually
when
you
need to
start the unit before it is
time for automatic stafiup
to occur
you
need to start
the unit on a day for which
the clock is turned off
.
you
need
to start the unit
because the clock was not
turned
on
1. lf the
power
is off,
press
the
POWER switch
to
turn
the unit
on.
2. lf
the auto-energize
heaters feature is
not on,
press
the HEATERS
key.
The HEATERS
light will turn
on and unit will begin to heat.
3.
Prepare
each
gun
in
your
system for
operation as follows:
o
Air-operated
guns:
turn on
the operating air.
o
Electric
guns:
turn on the
gun
driver.
o
Hand-operated
guns:
unlock
the trigger.
4.
Piston
pump
units only: turn on
the
pump
air
pressure
and adjust it to
the
setting that works
best for
your
system.
5.
Check the temperature setting
for each heated zone.
6.
Piston
pump
units
only:
lt
the auto-energize
pump
feature is not on,
press
the PUMP key
after the READY light
turns on. The
PUMP light
willturn on
and the
pump
will
start.
7.
Gear
pump
units
only:
When
the READY light
turns on,
press
the
PUMP
key. The
PUMP light willturn
on and the
pump
will start.
The system is ready
for routine
operation.
a
a
o
2000 Nordson
Corporation
All rights reserved
41-3000v
lssued 5/00
A4EN46-[3V-A-AAXV]-l

Nordson 3100V Series Specifications

General

Brand	Nordson
Model	3100V Series
Category	Melting Machines
Language	English