RTD-Style Hot
Melt Hose
5
Operation
@ontd)
a
ln a
humid
environment,
only equipment
featuring a corresponding
class of
protection
may be operated.
a
a
Do not operate the
unit in an explosive environment.
Keep
parts
of the body or clothing away
from rotating
parts.
Do not
wear
loose articles of clothing when operating
or servicing
units
with
rotating
parts.
Take
off
wrist watches, rings,
necklaces, or similar
pieces
of
jewelry
and
pin
up or cover long
hair before
performing
any
work on or
with
the unit.
To carry out measurements
on work
pieces,
switch
off
the
unit and
wait until it comes to a
standstill.
Never
point
hand
guns
or applicator nozzles
at
yourself
or other
persons.
Less-obvious
Dangers
WARNING: An operator or service
technician
working with the
unit should be aware of less-obvious
dangers that often
cannot
be
completely
minimized at
production
sites:
Exposed surfaces of the
unit which cannot be
practically
safeguarded.
They may be hot and take
time to cool after
the unit
has
been
operating.
The
possibility
that electrical
potentials
may remain
in the unit after
the
unit was de-energized
a
a
a
Hot melt rnaterialand
vapors
Hydraulically or
pneumatically
operated
parts
of the unit
Parts winding something up or down which
are not covered
Action in the Event of Unit Malfunction
lf the unit malfunctions, switch it off immediately.
o
Turn the circuit breaker or main
power
switch
OFF.
o
Have the unit repaired by
qualified personnel
only.
a
a
a
O
2O0O Nordson Corporalion
All rights
resorued
108 232E
lssued 1/00
Manual 45-21
To Next Page
Loading...
Need help?
General
