Nordson 3100V Series Customer Product Manual

A 4-8
Operation
Checking the Warning or Fault
Log
Use this
procedure
to check
the
warning
or fault log. These logs list the
causes of the three most recent
warnings or faults. The
actual
temperature display shows
the length of time the heaters have been
on
when
the warning/fault
occured.
1. Press
the Move
Up
and Move Down
keys until the
SYSTEM
SETTINGS light turns
on.
2. Press
the Up
key
below the
Selector display until the feature number
of the
warning
or fault
you
want
to check appears in the display.
Flefer to Table A 4-1 or A
4-2.
NOTE: Press
the right arrow key
to scroll through the features in
increments of 10.
Table A 4-1
Warning Log Feature Numbers
Table A 4-2 Faull Log
Feature Numbers
Feature
No.
Warning Displayed
35
36
37
The zone number and warning
code
for
the
most recent warning
will be displayed in the
Multipurpose display.
The zone number
and
warning
code
for
the
second most recent warning will be
displayed in the Multipurpose
display.
The zone number
and
warning
code
for
the
third
most recent warning
will be displayed
in
the
Multipurpose
display.
Feature No.
Fault
Displayed
27
28
29
The zone number and fault
code
for
the
most recent fault will be
displayed
in the
Multipurpose display.
The zone number
and
fault
code
for
the
second
most
recent
fault will be displayed
in
the Multipurpose display.
The zone
number and fault
code
for the
thiid most recent fault will be
displayed
in
the Multipurpose display.
A4EN-06-[3V-A-AAXV]-1
41
-3000v
lssued 5/00
e000 Nordson Corporation
All rights
reserved

Nordson 3100V Series Specifications

General

Brand	Nordson
Model	3100V Series
Category	Melting Machines
Language	English