Nordson 3100V Series Customer Product Manual

8
RTD-Style
Hot Melt Hose
Cleaning
@ontd)
Thermoplastic
Hot
Melt
Material
Equipment
and Material
Disposal
Polyurethane Reactive
('PUR")
Hot
Melt Material
a
Never use
an open flame to clean the unit or components of the unit.
a
a
a
Use
only cleaning fluids designed or intended
to be used
with
the hot
melt material being
used in the unit. Never use
paint
fluids under
any
circumstances.
Note
the
flash
point
of the
cleaning fluid
used.
Only use a controlled
heating method to heat fluids.
Ensure
sufficient room ventilation to draw off
generated
vapors.
Avoid
prolonged
breathing of
vapors.
NOTE:
Always
refer to the material manufacturer's Material Safety Data
Sheet
(MSDS)
or material information
sheet
before working with
any hot
melt material.
a
a
Ensure
the work
area
is
adequately
ventilated
Do not exceed
recommended
processing
temperatures.
Doing so
creates a danger
to
personnel
due
to decomposition of the material.
Dispose
of equipment and materials used in operation
and
cleaning
according
to
local
regulations.
NOTE:
Always refer
to the material manufacturer's Material Safety Data
Sheet
(MSDS)
or material information
sheet before working with any hot
melt
material.
WARNING:
Exercise extreme caution
and always
provide
adequate ventilation when using reactive materials.
WARNING:
Only use PUR material in units
that
are designed
to
process
such material. Using PUR material in units that
cannot
process
them can cause damage to the unit and
premature
reaction
of
the hot melt material.
WARNING: PUR material
contains
isocyanate
ingredients
which will irritate
skin, mucous membranes of eyes and
respiratory
passages.
WARNING: Persons with
existing asthmatic conditions may
experience
diff
iculty
in breathing.
Manual 45-21
108232E
lssued
1/00
O
20fi) Nordson Corporation
All righls reservsd

Nordson 3100V Series Specifications

General

Brand	Nordson
Model	3100V Series
Category	Melting Machines
Language	English