Chapter 9 Function setup
197
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
System
This operation sets the current date and time, the type of the connected light
source, the release time when an endoscopic image is stored to the PC card,
and the display type of the patient data with an endoscopic image.
Figure 9.5
Click “System” on the system setup menu. The setting screen appears on the
right part of the window (see Figure 9.5).
Date and time
This operation sets the current date and time, and the display format of the date.
1. Click the text box of “Date” and enter numeric characters for month, date
and year.
2. Click the text box of “Time” and enter hour, minute and second.
3. Click “ ” of “Format”. The date formats appear in the pull-down menu.
4. Click the format to use. The format is selected and displayed in the dialog
box.
Format Explanation
• MM/DD/YYYY
• MM-DD-YYYY
• MM.DD.YYYY
• MM DD YYYY
• DD/MM/YYYY
• DD-MM-YYYY
• DD.MM.YYYY
• DD MM YYYY
• YYYY/MM/DD
• YYYY-MM-DD
• YYYY.MM.DD
• YYYY MM DD
YYYY: year
MM: month
DD: day
Table 9.3
To Next Page
Loading...
Need help?
General
