Display Summary
J012/J013/J014 4-2 SM
4.1.2 DISPLAY MENU SUMMARY
Here is a brief summary of the function menus. The machine operates on the default
settings until a setting is changed. The changed settings remain in effect after the machine is
turned off and on.
Press [Menu] to put the printer in the menu mode.
[#] or [%] > To display an item.
[Yes]> Select the item and go to the next level down in the menu.
[No]> To return to the previous menu level. (Press repeatedly to return to standby.)
[Clear Modes]> Press once to return immediately to standby.
Menu/Menu Item Function
System Settings?
This menu includes important basic settings that affect operation of the machine.
1 Auto Reset Time? Allows the machine to reset a job setting to its original
values if the user pauses too long while setting up a job.
[0.5 to 1/0/1 min.]
0: OFF
Press [#] or [%] to select how long the machine waits
before it restores the original settings. These settings are
available: 0.5, 1, 2, 3, 4, 5 min.
2 Energ. Saver Timer? Switches the energy save function on/off. The default
setting is off (15 min.)
[1 to 240/15/ 1 min.]
When this function is on, the machine will automatically
shut down some of its functions after it remains idle for the
prescribed amount of time.
Note:
 The machine will require some time to recover after it
receives a print job while in the energy saver mode.
 The machine might not enter the energy save mode
while an error message is displayed.
To Next Page
Loading...
Need help?
General
