SP Mode Service Tables
J012/J013/J014 5-64 SM
2110 TH:ACL:AL:T2H4 Idle Time (2 Hours): Humidity Step 4
Use this SP to set the threshold value for the de-capping time for automatic print
head cleaning done before the start of printing.
[0 to 65535/0/1/sec.]
Set Threshold Idle Time for Maintenance Alarm
 SP2111 to SP2114 are for future use and not used at the present time.
2111 TH:ALM:TM1 Time 1: 20 Hours
2112 TH:ALM:TM2 Time 2: 7 Days
2113 TH:ALM:TM3 Time 3: 1 Month
2114 TH:ALM:TM4 Time 4: 3 Months
For Future Use. Use this SP to set the threshold time for the printer to remain idle
for maintenance to execute before the start of a print job. (Default: 7 Days). These
threshold values are related to SP2115 to 2118.
[0 to 65535/0/1/sec.]
To Next Page
Loading...
Need help?
General
