Ink
SM 6-37 J012/J013/J014
Detailed
Description
6.5.3 BELT TRANSFER SYSTEM
The machine employs an electrostatic transfer belt system to hold the paper in place during
printing. The strong electrostatic charge on the belt holds the paper tightly to the surface of
the belt as the paper is fed below the print heads that move above the surface of the paper.
This system positions the paper more efficiently than a roller system and holds it in place.
The printer can print over a wider area, the margins at the top and bottom of the paper are
only 4.2 mm (0.165"). The belt transfer system also allows use of wider print heads at faster
printing speeds.
6.5.4 LEVEL COLOR MODE
In order to conserve ink the printer can be set to the "Level Color Mode" to reduce the about
of ink used in graphic images only (text is not affected). Once Level Color Mode is selected
the amount of ink used to print images and graphics is reduced by almost 50%, the text
remains at the same density of the normal color mode.
To Next Page
Loading...
Need help?
General
