Image Correction
SM 4-51 J012/J013/J014
Trouble-
shooting
7. [(] > "Adjust" > [Yes].
*A B C
', ( & Yes
8. ['] or [(] > Select letter for the row (A, B, C)> [Yes]
Adj=0
OK=Yes
9. [#] or [%] > Select the number for the column
 # to select a + value
 % to select a – value
10. [Yes] > "Adjust"
11. [No] > "Cancel?" > [Yes]> Standby
4.5.7 REGISTRATION
Do this procedure to adjust the print start position. The print start position is the point at the
upper left corner of each sheet where printing begins. This procedure can be done for all the
paper feed sources: Tray 1 (Standard), Tray 2 (Option), Multi-Bypass Tray (Option).
1. [Menu]> "System Settings?"
2. [#] or [%] > "Maintenance?" > [Yes]> "1 Nozzle Check?"
3. [#] or [%] > "6 Registration" > [Yes].
4. ['] or [(] > "Print Test Pattern?" > [Yes].
5. ['] or [(] > Select the paper tray ("Tray 1", "Tray 2" or "Bypass") > [Yes].
 "Tray 2" and "Bypass" do not appear unless these options have been
installed. .
6. ['] or [(] > Select the type of paper loaded in the tray ("Plain, "Glossy", "Transparency",
etc) [Yes].
"*Please Wait*" displays until pattern printing is finished. Do not start any other
operation until printing stops.
To Next Page
Loading...
Need help?
General
