Clean this machine periodically to ensure use under optimal conditions.
WARNING
Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury or burns.
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a fire.
IMPORTANT
Disconnect the power cord before starting cleaning.
Do not use solvents, detergents with abrasive components, or strong cleansers. Using such cleaning products may
cause damage to the surface of the cutting machine or movable parts.
Cleaning the Parts that Come into Contact with the Material
Wipe off dirt and grime with a cloth moistened with water and then wrung out firmly.
Pinch roller Hold the roller with your hand so that it does not turn, and wipe off grime and
material scraps from the rubber part of the pinch roller. Then, wipe clean with
a dry cloth.
Carriage rail
*1
Wipe away any dust and grime.
Paper sensors After wiping away dust and grime, wipe clean with a dry cloth.
Platen After wiping away dust and grime, wipe clean with a dry cloth.
Grit roller
*1
After raising all of the pinch rollers, turn the grit roller while using a brush
*2
to
remove dust from the surface.
*1 When cleaning, move the cutting carriage away from where you are cleaning.
*2 Do not use a metal brush.
Cleaning the Machine
Cleaning and Replacing Consumable Parts 135
To Next Page
Loading...
Need help?
General