Need help?Do you have a question about the Roland Camm-1 GR2-540 and is the answer not in the manual?
General| Connectivity | USB 2.0, Ethernet |
|---|---|
| Cutting Method | Media-moving method |
| Power Supply | AC 100 to 240 V ±10%, 50/60 Hz |
| Power Requirements | AC 100 to 240 V ±10%, 50/60 Hz |
| Cutting Width | 54 inches |
| Maximum Cutting Speed | 1, 485 mm/s |
| Software Resolution | 0.025 mm/step |
| Weight | 187 lbs |
| Usable Tools | Cutting blade, plotting pen |
| Distance Accuracy | ±0.2% or 0.3 mm (0.012 in), whichever is greater |
| Repeatability Accuracy | ±0.1 mm |
| Alignment Accuracy for Print & Cut | ±0.04 inches |
| Operating Temperature | 41-95°F (5-35°C) |
| Operating Humidity | 35 to 80% RH (non-condensing) |
| Weight (with stand) | 187 lbs |
| Blade Type | Roland CAMM-1 series blades |
| Resolution | 0.025 mm/step |
To Next Page
