Replacing the Blade
If the blade becomes dull, replace it with the included replacement blade.
WARNING
Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury or burns.
CAUTION
Never touch the tip of the knife with your fingers.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
Procedure
1. Remove any material loaded in the machine.
2. Detach the cutting tool.
3. Replace the blade.
(1) Press the pin to push out the old blade.
(2) Insert a new blade.
4. Install the cutting tool in the cutting carriage.
5. Ensure that the screw is tightened.
Replacing Consumable Parts
138 Cleaning and Replacing Consumable Parts
To Next Page
Loading...
Need help?
General