Spare parts/accessories/scope of delivery
15
15.1 Overview
WARNING
Assembling the components
When assembling components, ensure that only those positioners and option modules are
combined with each other that are approved for the corresponding operating range.
These conditions particularly apply to safe operation of the positioner in hazardous areas.
Observe the applicable certificates and approvals or the "Technical data (Page 281)".
Basic version
The positioner can be delivered for:
● Double-acting actuators
● Single-acting actuators
The positioner and its option modules are delivered as separate units and with different
versions for the operation in:
● Hazardous environments and atmospheres
● Non-hazardous environments and atmospheres
Enclosure
The electronic unit with display, the position feedback, and the pneumatic block are integrated
in the enclosure.
The enclosure is available in the following versions:
● Polycarbonate enclosure for single-acting and double-acting actuators
● Aluminum enclosure for single-acting or double-acting actuators
● Stainless steel enclosure for single and double-acting actuators
● Flameproof enclosure for single and double-acting actuators
Options
The positioner can be equipped with different option modules. The following modules are
normally available:
● Position feedback module: two-wire current output 4 to 20 mA for position feedback
● Alarm module: 3 binary outputs and 1 binary input
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 299
To Next Page
Loading...
Need help?
General
