● SIA module: one binary output for fault messages, two binary outputs for limit monitors
● Mechanical limit switch module with two switches and one alarm output
● Internal NCS module 6DR4004-5L/-5LE
The SIA module and the mechanical limit switch module cannot be used in device versions with
flameproof enclosure. For more limitations, please refer to section "Technical data (Page 281)".
Accessories
● Pressure gauge block: 2 or 3 pressure gauges for single and double-acting positioners
● Mounting flange (NAMUR) for safety pneumatic block
● Mounting kits for linear and part-turn actuators
For separate mounting of positioner and position sensor
● External position detection system
● NCS sensor for contactless position detection
Note
The version is identified using a special nameplate.
15.2 Spare parts
Description Article number For version
Basic electronics
PROFIBUS PA, not Ex A5E00141523 6DR55..-.N
PROFIBUS PA, Ex A5E00141550 6DR55..-.D/E/F/G/K
Interface module for positioner without basic electronics A5E00151572 6DR5910-*
Interface module for 19-inch slide-in module 4 ... 20 mA A5E00151571 A5E00151560
Description Article number For version
Pneumatic block
Single-acting, with seal and screws C73451-A430-D80 6DR5.1.*
Spare parts/accessories/scope of delivery
15.2 Spare parts
SIPART PS2 with PROFIBUS PA
300 Operating Instructions, 05/2019, A5E00127926-AC
To Next Page
Loading...
Need help?
General
