Installing/mounting
4
4.1 Basic safety instructions
WARNING
High operating force with pneumatic actuators
Risk of injury when working on control valves due to the high operating force of the pneumatic
actuator.
● Please observe the corresponding safety instructions for the pneumatic actuator in use.
WARNING
It is possible to damage the cover gasket
If the cover gasket is not positioned correctly in the groove of the base plate, it could be
damaged when the cover is mounted and screwed tight.
● Therefore make sure that the gasket is seated correctly.
4.1.1 Exceeded maximum permissible operating pressure
WARNING
Exceeded maximum permissible operating pressure
Risk of injury or poisoning.
The maximum permissible operating pressure depends on the device version, pressure limit
and temperature rating. The device can be damaged if the operating pressure is exceeded.
Hot, toxic and corrosive process media could be released.
Ensure that maximum permissible operating pressure of the device is not exceeded. Refer to
the information on the nameplate and/or in Technical data (Page 281).
WARNING
Electrostatic charging of nameplates
The nameplates used on the device can reach a charging capacity of 5 pF.
● Keep the device and the cables at a distance from strong electromagnetic fields.
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 39
To Next Page
Loading...
Need help?
General
