NOTICE
Torque with NPT screwed gland
Device damage. The maximum torque of the cable gland must not be exceeded.
● To avoid damage to the device, the NPT adapter must be held in place while the NPT gland
is screwed into the NPT adapter. Refer to the section "Technical specifications
> Construction (Page 282)" for the torque value.
4.1.2 Proper mounting
4.1.2.1 Freezing of the exhaust air outlets
NOTICE
Freezing of the exhaust air outlets
When devices of the type 6DR5..0/1/2/3 are used, the exhaust air outlets ② may freeze. The
function of the device is impaired.
● Do not install the positioner with the base plate ① pointing up.
① Base plate
② Exhaust air outlets
Figure 4-1 Exhaust air outlets, base plate
WARNING
Loss of type of protection
Risk of explosion. Damage to device if the enclosure is open or not properly closed. The type
of protection specified on the nameplate or in Technical data (Page 281) is no longer
guaranteed.
● Make sure that the device is securely closed.
Installing/mounting
4.1 Basic safety instructions
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 41
To Next Page
Loading...
Need help?
General
