Siemens SIPROCESS GA700 User Manual

Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
11
Introduction
1
1.1
Purpose of this documentation
This documentation contains all the information you need to operate the device using the
local user interface (LUI).
The LUI consists of a display and keyboard with four keypads with which all analyzer
functions can be set using menus.
The analyzer can also be operated with SIMATIC PDM. Additional information on this topic is
available by referring the list of references in: Table A-2 References 2 - Operating
Manuals PDM (Page 281).
1.2
History
The following table includes information on the different editions of this document.
Table 1- 1 Document history
Edition
Comment
01
01/2013
First edition
Function "Sync." cannot currently be executed.
02
07/2014
Second edition
• Support of option modules 1.1 and 2.2.
• "[1] Quick start" menu with new functions for easier commissioning (Local User Inter-
face).
• Advanced operating options, e.g., "UNDO key" (Local User Interface)
• Switchover to SIMATIC PDM 8.1
03
05/2015
Second edition.
Content supplemented by content for the additional analyzer modules ULTRAMAT 7 and
CALOMAT 7.
04
03/2016
Fourth edition.
Additional module combinations for CALOMAT 7 and ULTRAMAT 7.
Extended ULTRAMAT 7 area of application: measurement of components NO, N
2
O,
SO
2
, CH
4
, C
2
H
4
, NH
3
06/2017
CALOMAT 7: 1-point calibration with substitute gas to shift the characteristics offset

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English