Siemens SIPROCESS GA700 User Manual

Functions
6.1 [1] Quick Start
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
85
6.1.4
[1.2] Automatic log-off
Procedure
Note
Function of automatic logoff
When this function is activated and the logoff time expires, the device logs you off
automatically. All changes that are not saved permanently will be discarded. The TLV
"Measured value display of all components" is display
ed again.
Before logoff time expires, a warning window will make you aware of the pending logoff
process. You can stop automatic logoff by pressing <ESC>.
Confirm the changes of the parameter assignment by pressing <MEAS> twice.
Note
Data in non-volatile memory
The following data are saved in non
-volatile memory immediately after a change and are
retained even in case of an automatic logoff:
•
Date & time
•
IP address
•
Display contrast and brightness
1. Main menu > "1. Quick Start" > "01 Automatic logoff"
2. Set the logoff time:
– Open the "Duration" parameter field.
You are prompted to enter the Expert PIN.
– Enter time in format hh:mm:ss:.
3. Enable/disable function:
– Open "Automatic logoff" parameter field.
– Select and accept "active" or "inactive" value.

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English