Siemens SIPROCESS GA700 User Manual

Functions
6.28 [5] Security
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
251
6.28
[5] Security
6.28.1
Assigning / changing personal identification numbers (PIN)
Procedure
1. Main menu > "5. Security" > "1. Access management"
The parameter display includes parameter boxes that you use to specify the PINs of the
permission levels.
2. Assign/change passwords:
The table below summarizes the assignment/change options:
Permission level
Assignment/change options
1)
Standard →
Standard only
Expert
→
Standard and Expert
Service →
Standard, Expert, and Service
1)
Parameter boxes that require a higher permission level are locked.
– Select the required permission level.
– Open the parameter box.
Authorize access by input of the corresponding PIN.
Use the following PIN for the corresponding permission levels during initial
commissioning: Standard: 1111, Expert: 2222.
– Enter new four-digit password in the "PIN" editing window. A PIN must have 4 digits.
The editing window is closed after the input.
6.28.2
Automatic log-off
Procedure
Note
Factory setting
The "Automatic log
-off" function is activated in the factory. The default time is 5 minutes. If
required, d
isable the function or set a different value for the time.

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English