Siemens SIPROCESS GA700 User Manual

Functions
6.13 [2.14] Settings > Set message parameters
Operating with the Local User Interface
188 Operating Manual, 06/2017, A5E31930478-05
6.13.2
Filtering messages
Procedure
1. Main menu > "2. Settings" > "14. Set message parameters" > "1. Filter..."
2. Set the filter conditions.
Set one or more filter conditions. Use the following parameter fields or editing windows
for this purpose:
– "Message activity":
"All": All messages are displayed by default.
"Switched on": Only the switched on messages are displayed.
"Turned off": Only the turned off messages are displayed.
– "ID No.":
The wildcards"???" are set by default.
All messages are displayed.
To filter messages with numbers 200 to 299, for example, replace the first "?" with the
value "2" ("2??).
– "Component/module":
Select/deselect the check boxes included in the editing window. Only those messages
whose properties you have selected are displayed.
"Device" relates to general messages from components or two messages of the
processing module. You can also filter for those messages that only apply to specific
components or specific modules.
– "Message type":
Select/deselect the check boxes included in the editing window. Only those messages
whose properties you have selected are displayed.
All message types are activated by default. When you select the check box "None", all
other check boxes are deselected.
3. Set individual message parameters: → Set message parameters (Page 187).

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English