Siemens SIPROCESS GA700 User Manual

Functions
6.9 [2.10] Settings > Correction of cross-interferences
Operating with the Local User Interface
168 Operating Manual, 06/2017, A5E31930478-05
6.9.5
Setting the correction of cross-interference
Procedure
1. Component > Main menu > "2. Settings" > "10. Correction of cross-interference"
The menu includes six navigation lines that you use to set or activate the correction of
cross-interferences for the selected component. The menu entries are structured as
follows:
Structure of the navigation lines
1 Total
1)
Activation status (on/off)
Edit
4)
2 Constant
2)
Activation status (on/off)
Edit
4)
3 … 6
3)
Source of cross-
interference measured
value
Name of cross-
interference measured
value
Activation status (on/off)
Edit
4)
1)
Enable/disable all corrections of cross-interference
2)
Determine and enable constant correction of cross-interference.
3)
Variable corrections of cross-interference
4
)
Editing line
2. Assign constant correction of cross-interference or variable correction of cross-
interference.
– Assigning correction of cross-interference with a constant (Page 169)
– Assigning variable correction of cross-interference (Page 170)
3. Totally enable/disable assigned corrections of cross-interferences.
– Enabling/disabling all corrections of cross-interferences (Page 179)
See also
Setting instructions (Page 166)
Correction of cross-interference in the application "H2 in N2 (Q)" for furnace gas, converter
gas and wood distillation (Page 175)

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English