Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
158
The display device will display , and the LCD screen of the video conferencing phone
will display .
To configure DND during a call via the remote control:
1. Press the More soft key.
2. Check the DND checkbox.
3. Press the Back soft key to exit the More window.
The display device will display , and the LCD screen of the video conferencing phone
will display .
Auto Answer
The auto answer feature allows the endpoint to answer incoming calls automatically. The auto
answer mute feature allows the endpoint to turn off the microphone when an incoming call is
answered automatically. The auto answer mute feature is available only when the auto answer
feature is enabled. The auto answer multiway feature allows the endpoint to answer new
incoming calls automatically during an active call.
Auto answer parameters on the endpoint are described below:
Enables or disables the auto answer
feature on the endpoint.
Default: Enabled
Remote Control
Web User Interface
Enables or disables the auto answer
mute feature on the endpoint.
Default: Enabled
Auto answer mute feature is
configurable only when the auto
answer is enabled.
Remote Control
Web User Interface
Enables or disables the auto answer
multiway feature on the endpoint.
Default: Disabled
The auto answer multiway feature is
available only when the auto answer is
enabled.
Remote Control
Web User Interface
To configure auto answer via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Auto Answer.
3. Select the desired value from the pull-down list of Auto Answer Mute.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
