Yealink VC110 Administrator's Guide

Troubleshooting
285
8.
Click
Export
to open the file download window, and then save the file to your local
endpoint.
To capture packets using the Ethernet software:
Connect the Internet ports of the endpoint and the PC to the same HUB, and then use Sniffer,
Ethereal or Wireshark software to capture the signal traffic. You can also set mirror port on a
switch to monitor the port connected to the endpoint.
Getting Information from Status Indicators
In some instances, status indicators are helpful for finding endpoint troubles. Status indicators
may consist of the power LED, icons on the status bar of the display device or prompt messages.
The following shows two examples of obtaining the endpoint information from status indicators:
 If a LINK failure of the endpoint is detected, the icon will appear on the status bar of
the display device, indicating the current network is not available.
 If the power LED does not light, it indicates the endpoint is not powered on.
For more information on the icons, refer to Icon Instructions on page 33.
Analyzing Configuration Files
Wrong configurations may have an impact on your endpoint use. You can export configuration
file to check the current configuration of the endpoint and troubleshoot if necessary. For more
information on how to export endpoint configuration, refer to Importing/Exporting
Configuration on page 272.

Yealink VC110 Specifications

General

Digital zoom	4 x
Focus adjustment	Auto
Video codecs	H.264, H.263
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Video formats supported	H.263, H.264
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711a, G.722, G.722.1, G.722.1C
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range	-100 - 100 °
Tilt angle range	-30 - 30 °
Security algorithms	128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current	2 A
Power consumption (max)	30 W
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	151.5 mm
Width	234.6 mm
Height	161 mm
Package depth	318 mm
Package width	432 mm
Package height	274 mm
Package weight	5900 g