EasyManuals Logo
Home>Yealink>Conference System>VC110

Yealink VC110 Administrator's Guide

Yealink VC110
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #266 background imageLoading...
Page #266 background image
Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
250
Parameter
Description
Configuration Method
Note: It can only be configured
when the user mode is enabled. The
endpoint supports ASCII characters
32-126(0x20-0x7E) in passwords.
You can leave the password blank.
To configure user mode via web user interface:
1. Click on Security->Security.
2. Select User from the pull-down list of User Type.
3. Select Enabled from the pull-down list of User Mode.
4. Configure a password or leave it blank in the User Password field.
5. Click Confirm to accept the change.
Administrator Password
The default enabled user type is administrator. Users can log into the web user interface and
access the “Advanced menu with administrator privilege by default. The default administrator
password is “0000” and can be only changed by an administrator. For security reasons, the
administrator should change the default administrator password as soon as possible. The
endpoint supports ASCII characters 32-126(0x20-0x7E) in passwords.
Administrator password parameters on the endpoint are described below:
Parameter
Description
Configuration Method
User Type
Specifies the user type.
Default: Administrator
Note: To configure a new
administrator password, you need to
select Administrator for this
parameter.
Web User Interface
Old Password
Enters the old administrator
password.
Note: The default administrator
password is “0000”.
Remote Control
Web User Interface

Table of Contents

Other manuals for Yealink VC110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VC110 and is the answer not in the manual?

Yealink VC110 Specifications

General IconGeneral
Digital zoom4 x
Focus adjustmentAuto
Video codecsH.264, H.263
Maximum frame rate30 fps
Supported video modes720p, 1080p
Video formats supportedH.263, H.264
Supported graphics resolutions352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecsG.711a, G.722, G.722.1, G.722.1C
Line-inYes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range-100 - 100 °
Tilt angle range-30 - 30 °
Security algorithms128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates10, 100 Mbit/s
Supported network protocolsTCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current2 A
Power consumption (max)30 W
Power consumption (typical)24 W
Storage temperature (T-T)-20 - 50 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth151.5 mm
Width234.6 mm
Height161 mm
Package depth318 mm
Package width432 mm
Package height274 mm
Package weight5900 g

Related product manuals