Configuring Endpoint Settings
205
Mix Sending
Content sharing allows users to share content with other conference participants during a call.
When a PC is connected to the PC port on the VC110 all-in-one unit, the display device can
display both the camera video and the shared content. The content sharing feature is very useful
in the conference scenario in which content sharing is needed (e.g., a slide or a flash).
During a conference call, the far site may not support receiving shared content. In this case, you
can enable mix sending feature on the endpoint. Mix sending feature allows the sender to
compound multiple video streams (local image+shared content) to one video stream, and then
send it to the far site.
The mix sending parameter on the endpoint is described below.
Enables or disables the mix sending
feature on the endpoint.
Default: Enabled
To configure mix sending via web user interface:
1. Click on Setting->Video & Audio.
2. In the Presentation block, select the desired value from the pull-down list of Mix.
3. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
