Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
242
3. Click Delete Calllog, and select Selected.
The web user interface prompts ”Delete the calllog ‘xxx’？”
5. Click Confirm to delete the call log.
You can also select Delete All from the from the pull-down list of Delete Calllog to delete all
call log.
Search Source List in Dialing
When you enter a few characters in the dialing screen, the endpoint will search for contacts from
the enabled search source lists, and display the result in the dialing screen. The lists can be
History, Local Directory, Cloud Contact (including your Yealink Cloud contacts and YMS contacts)
and LDAP.
To match the desired list, you need to enable the search source list first. If you want to match the
LADP list, make sure LDAP is already configured. For more information on how to configure
LDAP, refer to LDAP on page 235.
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled column
and click .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
