Yealink VC110 Administrator's Guide

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
182
7. Click Confirm to accept the change.
To configure the time and date format via the remote control:
1. Select Menu->Basic->Date & Time.
2. Configure the desired values.
3. Press the Save soft key to accept the change.
The time and date displayed on the LCD screen of the display device and video
conferencing phone will change accordingly.
Automatic Sleep Time
The endpoint will enter the sleep mode automatically when it has been inactive for a period of
time (the default time is 10 minutes). When the endpoint is in sleep mode, it can still accept
incoming calls. The display device will prompt ”No Signal”, and the LCD screen of the video
conferencing phone prompts “Sleeping Press any key to resume”. You can press any key on the
remote control or the video conferencing phone to wake the endpoint up. When receiving a call,
the endpoint will be woken up automatically.
You can change the automatic sleep time via the remote control or web user interface. You can
also press the sleep key on the remote control to make the endpoint sleep immediately.
The automatic sleep time is described below:
Parameter
Description
Configuration Method
Automatic Sleep
Time
Configures the inactive time (in
minutes) before the endpoint enter
sleep mode.
Default: 10 Min
Note: During setup wizard, the
automatic sleep time feature is
disabled automatically. To protect
the display device, you should
configure the automatic sleep time
immediately.
Remote Control
Web User Interface
To configure the automatic sleep time via web user interface:
1. Click on Setting->General.

Yealink VC110 Specifications

General

Digital zoom	4 x
Focus adjustment	Auto
Video codecs	H.264, H.263
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Video formats supported	H.263, H.264
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711a, G.722, G.722.1, G.722.1C
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range	-100 - 100 °
Tilt angle range	-30 - 30 °
Security algorithms	128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current	2 A
Power consumption (max)	30 W
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	151.5 mm
Width	234.6 mm
Height	161 mm
Package depth	318 mm
Package width	432 mm
Package height	274 mm
Package weight	5900 g