Yealink VC110 Administrator's Guide

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
48
Endpoint Initialization
Once you have power on the endpoint, it will begin its initialization process.
During the initialization process, the following events take place:
Loading the ROM file
The ROM file sits in the flash memory of the endpoint. Endpoints come from the factory with a
ROM file preloaded. During initialization, endpoints run a bootstrap loader that loads and
executes the ROM file.
Configuring the VLAN
If the endpoint is connected to a switch, the switch will notify the endpoint about the VLAN
information defined on the switch.
Querying the DHCP (Dynamic Host Configuration Protocol) Server
The endpoint is capable of querying a DHCP server. DHCP is enabled on the endpoint by default.
The following network settings can be obtained from the DHCP server during initialization:
 IP Address
 Subnet Mask
 Gateway
 Primary DNS (Domain Name Server)
 Secondary DNS
You need to configure the network settings of the endpoint manually if any of them are not
provided by the DHCP server. For more information on configuring network settings manually,
refer to Configuring Network Settings Manually on page 61.
Endpoint Startup
After the initializing process, the endpoint will complete startup by cycling the following steps:
1. The LED indicator on the VC110 all-in-one unit illuminates solid green.
2. The display device displays the boot up screen.
3. The camera pans to the middle position automatically.
4. The display device displays the setup wizard (when you first start up, or reset the endpoint,
the display device will display the setup wizard)
For more information on how to complete the setup wizard, refer to Setup Wizard on page
49.
5. After completing the setup wizard, the display device displays the main screen.
The main screen displays the following:
 Time and date

Yealink VC110 Specifications

General

Digital zoom	4 x
Focus adjustment	Auto
Video codecs	H.264, H.263
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Video formats supported	H.263, H.264
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711a, G.722, G.722.1, G.722.1C
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Pan range	-100 - 100 °
Tilt angle range	-30 - 30 °
Security algorithms	128-bit AES, HTTPS, SRTP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols	TCP/IP (IPv4), DHCP/ stastic IP, HTTP/ HTTPS, SRTP/TLS, IEEE802.1X, LLDP-MED, VLAN
Current	2 A
Power consumption (max)	30 W
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	151.5 mm
Width	234.6 mm
Height	161 mm
Package depth	318 mm
Package width	432 mm
Package height	274 mm
Package weight	5900 g