Autronica Autroprime 2 User Manual

Unit Configuration
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 38
5.2.8 Disconnect from Alarm Zone
This menu allows you to disconnect a detection zone from an alarm
zone.
From the Detection Zones Menu (5.2.1), perform the following:
 After pressing the Function button for the selected detection
zone(s), use the arrow down button to select Disconnect from
Alarm Zone, then press Enter twice.
 Use the arrow down/up button to select the alarm zone to be
disconnected, then press Enter.
 To confirm the setting, press Enter once more.
5.2.9 Disconnect from Output
This menu allows you to disconnect a detection zone from an output.
From the Detection Zones Menu (5.2.1), perform the following:
 After pressing the Function button for the selected detection
zone(s), use the arrow down button to select Disconnect from
Output, then press Enter twice.
 Use the arrow down/up button to select the output to be
disconnected, then press Enter.
 To confirm the setting, press Enter once more.
5.2.10 Disconnect from Disable Input Device
This menu allows you to disconnect a detection zone from a Disable
Input Device (DID).
From the Detection Zones Menu (5.2.1), perform the following:
 After pressing the Function button for the selected detection
zone(s), use the arrow down button to select Disconnect from
Disable Output Device, then press Enter twice.
 Use the arrow down/up button to select the device to be
disconnected, then press Enter.
 To confirm the setting, press Enter once more.
5.2.11 Disconnect from Local Alarm Delay Unit
This menu allows you to disconnect a detection zone from a Local
Alarm Delay Unit.
From the Detection Zones Menu (5.2.1), perform the following:
 After pressing the Function button for the selected detection
zone(s), use the arrow down button to select Disconnect from
Local Alarm Delay Unit, then press Enter twice.
 Use the arrow down/up button to select the device to be
disconnected, then press Enter.
 To confirm the setting, press Enter once more.





Autronica Autroprime 2 Specifications

General

Brand	Autronica
Model	Autroprime 2
Category	Measuring Instruments
Language	English