Autronica Autroprime 2 User Manual

Unit Configuration
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 51
5.5 Fire Alarm Devices
5.5.1 Accessing the Menu
From the Service Menu, perform the following:
 Use the arrow down button to scroll downwards to
Unit Configuration, then press Enter.
 Use the arrow down button to select Fire Alarm Device, then
press Enter once more.
 Use the arrow up/down buttons to select the Fire Alarm Device
that is to be configured.
 To view or change properties for the selected Fire Alarm Device,
refer to Configure Properties for a Fire Alarm Device (chapter
5.5.2).
 To access available functions for a selected Fire Alarm Device,
press the Function button
, or use, if necessary, the
multiselect feature to select several Fire Alarm Devices by
pressing the Select button
to mark the Fire Alarm Devices
that are to be configured, and then press the Function button .
The following menu selections will appear:
o Move to Alarm Zone (chapter 5.5.3)
o Show Connected Units (chapter 5.5.4)
 Scroll with the arrow up/down buttons to select the desired menu,
then follow the instructions in the relevant chapter.


Autronica Autroprime 2 Specifications

General

Brand	Autronica
Model	Autroprime 2
Category	Measuring Instruments
Language	English