Introduction
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 8
1. Introduction
1.1 About the Handbook
This document describes in detail how to configure site-specific
installations of the Autroprime Interactive Fire Detection System
by means of the operating buttons on the panel.
1.2 The Reader
This handbook is intended for technicians and service personnel
who are responsible for the site-configuration of the Autroprime
system. We assume that the reader is familiar with the manoeuvre
and utility buttons which are described in detail in the Operator’s
Handbook.
1.3 Reference Documentation
The table below shows an overview of the complete technical
documentation that is available in several languages:
Documents Part number File name
System Description 116-P-APRIME2-SYSTEM/XGB aprime2system_xgb
Getting Started 116-P-APRIME2-GESTAR/EGB aprime2gestar_egb
Installation Handbook 116-P-APRIME2-INSTAL/DGB aprime2instal_dgb
Connecting Loop Units 116-P-CONNECTLOOPUNIT/DGB connectloopunit_dgb
Configuration Handbook 116-P-APRIME2-CONFIG/EGB aprime2config_egb
Operator’s Handbook 116-P-APRIME2-OPERAT/FGB aprime2operat_fgb
User Guide 116-P-APRIME2-USERGU/LGB aprime2usergu_lgb
Wall Chart 116-P-APRIME2-WALLC/LGB aprime2wallc_lgb
Menu Structure 116-P-APRIME2-MENUS/MGB aprime2menus_mgb
Datasheet; Fire Alarm Control Panel BS-200 116-P-BS200/CGB bs200_cgb
Datasheet;
Fire Alarm Control Panel BS-200M
116-P-BS200M/CGB bs200m_cgb
Datasheet;
Fire Alarm Control Panel BS-200L
116-P-BS200L/CGB bs200l_cgb
Datasheet; Repeater Panel BS-211 116-P-BS211/CGB bs211_cgb
Datasheet; Information Panel BV-210 116-P-BV210/CGB bv210_cgb
Datasheet; Fire Brigade Panel BU-210 116-P-BU210/CGB bu210_cgb
Datasheet; Mimic Driver BUR-200 116-P-BUR200/CGB bur200_cgb