Serial port
IX14 devices have a single serial port that provides access to different features, depending on the
serial port mode selection.
Default serial port configuration
You can review the default serial port configuration for your device.
Serial mode options
You can choose a serial mode option for each serial port, depending on the feature that you want to
use.
n
Login: Allows the port to be used to log into the CLI.
n
Remote Access: Provides socket level access to ports.
n
Application: Provides access to the serial device from Python applications.
n
UDP serial: Provides access to the serial port using UDP.
n
Modbus: Allows the device to function as a Modbus protocol gateway.
View serial port information
n
Show serial status and statistics
n
Log serial port messages
Default serial port configuration
The IX14 default serial port configuration is:
n
Enabled
n
Serial mode: Login
n
Label: None
n
Baud rate: 115000
n
Data bits: 8
n
Parity: None
n
Stop bits: 1
n
Flow control: None
Configure Login mode
Login mode allows the user to log into the device through the serial port.
IX14 User Guide
153
To Next Page
Loading...
Need help?
General
