Services Allow remote access for web administration and SSH
IX14 User Guide
317
Allow remote access for web administration and SSH
By default, only devices connected to the IX14's LAN have access to the device via web administration
and SSH. To enable these services for access from remote devices:
n
The IX14 device must have a publicly reachable IP address.
n
The External firewall zone must be added to the web administration or SSH service. See
Firewall configuration for information on zones.
n
See Set the idle timeout for IX14 users for information about setting the inactivity timeout for
the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
To Next Page
Loading...
Need help?
General
