Command line interface Display help for commands and parameters
IX14 User Guide
777
update Update firmware.
>
Display help for individual commands
When included with a command name, both ? and help provide further information about the
command. For example:
1. To display further information about the show command, type either show ? or show help:
> show ?
Commands
------------------------------------------------------------------------
--
arp Show ARP tables
cloud Show drm statistics
config Show config deltas.
dhcp-lease Show DHCP leases.
dns Show DNS servers.
event Show event list
ipsec Show IPsec statistics.
location Show loction information.
log Show syslog.
manufacture Show manufacturer information.
modbus-gateway Show modbus gateway status & statistics.
modem Show modem statistics.
network Show network interface statistics.
ntp Show NTPîžinformation.
openvpn Show OpenVPN statistics.
route Show IP routing information.
scripts Show scheduled scripts.
serial Show serial statistics.
surelink Show Surelink statistics.
system Show system statistics.
version Show firmware version.
vrrp Show VRRPîžstatistics.
web-filter Show web filter information.
> show
2. To display a syntax diagram and parameter information about a specific command:
> show arp ?
Syntax: arp [ipv4] [ipv6] [verbose]
Parameters
------------------------------------------------------------------------
-------
To Next Page
Loading...
Need help?
General
