Digi IX14 Quick start
The following steps guide you through the IX14 setup using the IX14.
Step 1: What's in the box
When you open the IX14 package, look for the following:
n
Digi IX14 device
The Digi IX14 has a product label on the bottom of the device. The label includes product
identification information and the default password assigned to the device. The IX14 also
includes a terminal connector for the power supply installed in the power input.
n
Insert cards
n
Digi IX14 label
Printed copy of the product label on the bottom of your device. You can affix this label to the
top or side of the device such that you can access the label after the device is mounted, or
store the label in a safe place for future reference.
Note A subscription to Digi Remote Manager is bundled with your IX14 purchase. See Digi Remote
Manager product page to learn about Digi Remote Manager features.
Step 2: Gather accessories
Note Digi offers several IX14 accessory kits so you can purchase exactly what you need to support
your IX14. See IX14 accessory kits for details or go to IX14 support.
Here's the list of accessories used in this Quick start:
Antennas
Use antennas provided by a Digi accessory kit or use alternate antennas that
comply with the IX14 antenna requirements.
IX14 User Guide
20
To Next Page
Loading...
Need help?
General
