Command line interface Display status and statistics using the show command
IX14 User Guide
782
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX14-22.2.9.85.bin
local /etc/config/scripts to local
admin@192.168.4.1's password: adminpwd
IX14-22.2.9.85.bin 100% 36MB 11.1MB/s 00:03
>
Transfer a file from the IX14 device to a remote host
To copy a file from the IX14 device to a remote host, use the scp command as follows:
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
n
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the location on the remote host where the file will be copied.
n
local-path is the path and filename on the IX14 device.
For example:
To copy a support report from the IX14 device to a remote host at the IP address of 192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report /var/log/
Saving support report to /var/log/support-report-0040D0133536-22-03-03-
10:16:23.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/var/log/support-report-00:40:D0:13:35:36-22-03-03-10:16:23.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-22-03-03-10:16:23.bin
>
Display status and statistics using the show command
The IX14 show command display status and statistics for various features.
For example:
show config
The show config command displays all the configuration settings for the device that have been
changed from the default settings. This is a particularly useful when troubleshooting the device.
> show config
auth tacacs+ service "login"
auth user admin password
To Next Page
Loading...
Need help?
General
