Digi IX14 User Manual

Routing Show the routing table
IX14 User Guide
723
---------------------------------------------------------------------
----------
ecmp false Allow ECMP
enable true Enable
Additional Configuration
---------------------------------------------------------------------
----------
interface Interfaces
neighbour Neighbours
redis Route redistribution
timer Timers
(config)>
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show the routing table
To display the routing table:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English