Containers Configure a container
IX14 User Guide
434
Configure a container
Required configuration items
n
The following configuration options are completed automatically if Create Configuration was
selected when the container was created. See Upload a newLXCcontainer for details:
l
Name of the container.
l
Enable the container.
l
Whether or not the container should use the device's system libraries.
n
Determine whether or not the device should including virtual networking capabilities.
Additional configuration items
n
If virtual networking is enabled:
l
The bridge to be used to provide network connectivity.
l
A static IP address for the container.
l
The network gateway.
n
Serial ports on the device that the container will have access to.
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Containers.
4. For Add Container, type the name of the container and click .
The Container configuration window is displayed.
To Next Page
Loading...
Need help?
General
