File system Upload and download files
IX14 User Guide
765
Transfer a file from the IX14 device to a remote host
To copy a file from the IX14 device to a remote host, use the scp command as follows:
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
n
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the location on the remote host where the file will be copied.
n
local-path is the path and filename on the IX14 device.
For example:
To copy a support report from the IX14 device to a remote host at the IP address of 192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report /var/log/
Saving support report to /var/log/support-report-0040D0133536-22-03-03-
10:16:23.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/var/log/support-report-00:40:D0:13:35:36-22-03-03-10:16:23.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-22-03-03-10:16:23.bin
>
Upload and download files using SFTP
Transfer a file from a remote host to the IX14 device
This example uploads firmware from a remote host to the IX14 device with an IP address of
192.168.2.1, using the username ahmed:
$ sftp ahmed@192.168.2.1
Password:
Connected to 192.168.2.1
sftp> put IX14-22.2.9.85
Uploading IX14-22.2.9.85 to IX14-22.2.9.85
IX14-22.2.9.85
100% 24M 830.4KB/s 00:00
sftp> exit
$
Transfer a file from the IX14 device to a remote host
This example downloads a file named test.py from the IX14 device at the IP address of 192.168.2.1
with a username of ahmed to the local directory on the remote host:
To Next Page
Loading...
Need help?
General
